Yds-20 Liquid Nitrogen Container Artificial Insemination Equipment Ln2 Tank

Yds-20 Liquid Nitrogen Container Artificial Insemination Equipment Ln2 Tank

  Panshi liquid nitrogen tank is made of aviation aluminum and structured with high-vacuumed super adiabatic multi-layers. It is light by weight and the daily evaporation rate of liquid nitrogen is very low.

Yds-20 Liquid Nitrogen Container Artificial Insemination Equipment Ln2 Tank

  Detail introduction of cryogenics liquid nitrogen containers tank :

  1.Inner liner of cryogenics liquid nitrogen containers tank is made of high strength aluminum alloy, sturdy and durable.

  2.Between the liner and the outer liner is a high vacuum, vacuum film with multilayer imported insulation material, therefore has good refrigerating performance.

  3. Neck plug is made of nontoxic plastic good adiabatic property, it has dual role to reduce the liquid nitrogen evaporation and fixed lifting cylinder.

  4. Neck tube is enhanced compounds made of glass, it has the extremely low thermal conductivity, can be put into the external heat control at the lowest temperature from cervical canal.

  5.In a vacuum, part of which is provided with a gas adsorbing agent, it can adsorb gas metal vacuum cavity or other substances volatile out, thus maintaining a high vacuum.

Yds-20 Liquid Nitrogen Container Artificial Insemination Equipment Ln2 Tank

  15L liquid nitrogen tank

  1. High-strength aluminum alloy structure, light empty weight for cryogenic liquid nitrogen tank

  2. The lockable device can be installed to the container lid upon customer's requirements so as to protect biological samples stored (limit for 50mm,80mm and 125mm calibers)

  3. Encoding system is applied on canisters for easy recognition and convenient accessing of samples

  4. More than 1 years of vacuum quality guarantee is ensured with the multi-layer thermal isolation design

  5. Not suitable for long –distance transportation or frequent pouring

Welcome To Our Company Hope We Can Have A Good Cooperation.