Milk Storage Tanks And Milk Silo

Milk Storage Tanks And Milk Silo

  Product Details:

       1. Protective cover The cover with classic blue canvas, is sturdy to use.

       2. Lock cover It is used for holding canister and saving precious samples.

       3. Neck plug The loose-fitting stoppers is made of special ultralight material with low temperature resistant. It is forbidden to seal too tight for tanks.

       4. Canister

  We have 3 Canisters (3 or 3 litre above) included for one tank. canisters are convenient to store sample.5. Neck mouth

  Liquid nitrogen tanks include 50mm, 80mm, 125mm, 210mm caliber.6. Vacuum port

  The vacuum port is covered of silicone cap.

  Remember not to open it.

Milk Storage Tanks And Milk Silo

  Dry shipper series is suitable for cryogenic environment (vapor storage at temperatures below -190℃) transportation for samples. It could avoid is risk of the liquid nitrogen releasing during transportation, especially designed for short-term air transport. The internal liquid nitrogen absorbent, can absorb and save liquid nitrogen, even if the container falls down, liquid nitrogen would not pour not. It users specially stainless steel mesh to separate storage space and absorption material mixed into the sample. Mainly used for laboratory users and short-term delivery of small number samples.

  Features

  Five years vacuum warranty.

  Durable aluminum structure.

  Equipped with racks and vial boxes.

  Large capacity, low liquid nitrogen consumption.

Milk Storage Tanks And Milk Silo

  Liquid nitrogen storage dewar structure details:

  1. The liner of liquid nitrogen container is adopted high-strength aluminum alloy, It’s durable.

  2. The inner and outer linings are a high vacuum, vacuum film, with multiple layers of imported insulation, and therefore have good cooling performance.

  3. Cervical plug is made of non-toxic plastic products, has a dual role, can reduce the role of liquid nitrogen evaporation and fixed cylinder.

  4. The neck tube is made of glass reinforced compounds, with very low thermal conductivity, can be placed in the neck of the lowest temperature external heat control.

  5. In a vacuum, a portion of the gas adsorbent can adsorb the gas metal vacuum chamber or other volatiles, thus maintaining a high degree of vacuum.

Welcome To Our Company Hope We Can Have A Good Cooperation.