Ydh13-80 Artificial Insemination Storage Container By Air

Ydh13-80 Artificial Insemination Storage Container By Air

  Working principle:

       (1)The liquid nitrogen storage tank consists of an inner container,an outer container ,a canister and a neck tube lingking two containers above. The strength durable inner container and outer container are made up of high strength aluminum alloy.

  (2) The tank employs multi-layer thermal insulation material in high vacuum space between the inner and outer containers. Therefore it has excellent performance of deep freezing.

  (3) The neck tube is made of reinforced glass plastic which has the lowest heat conduction coefficient, and for this reason it can control outside heat coming into the container from the neck tube to the minimum limit.

Ydh13-80 Artificial Insemination Storage Container By Air

  Liquid Storage Tank:

  1. Capacity:5-100M3

  2.WP:0.8-1.75MPa

  3.Dimension(mm): Dia2216*L4405~Dia3520*L17585

  4.Certification:BV/SGS/TUV

Ydh13-80 Artificial Insemination Storage Container By Air

  Dry shipper series is suitable for cryogenic environment (vapor storage at temperatures below -190℃) transportation for samples. It could avoid is risk of the liquid nitrogen releasing during transportation, especially designed for short-term air transport. The internal liquid nitrogen absorbent, can absorb and save liquid nitrogen, even if the container falls down, liquid nitrogen would not pour not. It users specially stainless steel mesh to separate storage space and absorption material mixed into the sample. Mainly used for laboratory users and short-term delivery of small number samples.

  Features

  Five years vacuum warranty.

  Durable aluminum structure.

  Equipped with racks and vial boxes.

  Large capacity, low liquid nitrogen consumption.

Welcome To Our Company Hope We Can Have A Good Cooperation.