Stainless Steel Dry Shipper Ydh-3 Containerank Of Liquid Nitrogen

Stainless Steel Dry Shipper Ydh-3 Containerank Of Liquid Nitrogen

  Product advantage:

  1.We have 40 years of experience for liquid nitrogen tank.

  2.High-strength aviation grade aluminum alloy structure.

  3.The multi-layer thermal isolation design ensures product quality for 5 years.

  4. The products have protective cover,which can enhance the protection of the products away from reel and stumble.

Stainless Steel Dry Shipper Ydh-3 Containerank Of Liquid Nitrogen

  In the electronics industry in the application

  1, superconducting skills

  2, electronic components manufacturing and testing

  3, cryomilling skills

  4, green machining skill

  other areas

  It is pushing agent rocket fuel, large amounts of liquid nitrogen with high pressure to rocket fuel to the combustion chamber.

  Applied in HTS power cable to open.

  Liquid nitrogen artificial rainmaking skills.

  The admission of nitrogen underground fire.

Stainless Steel Dry Shipper Ydh-3 Containerank Of Liquid Nitrogen

  The liquid nitrogen tank maintenance

  The liquid nitrogen tank idle when not in use, should rinse with clean water, the water drainage, the blower for drying at room temperature, placed ready. Liquid nitrogen tank of liquid nitrogen volatilization after, left missing material (such as frozen sperm) melt quickly, into a liquid material attached to the liner, the liner of aluminum alloy will cause corrosion, if the formation of cavity, a liquid nitrogen tank will be scrapped, so the liquid nitrogen tank of liquid nitrogen after depletion on jar in brushing is very necessary the. The specific measures are as follows: first the scrubbing liquid nitrogen tank within tube removed, liquid nitrogen is removed, placed 2 to 3 days, until the tank temperature up to 0 ℃ , and then inverted 30 degrees around the warm water, scrub with a cloth. If discover the individual melted material stick in the liner on the bottom, be sure to carefully wash clean. And then rinse with water several times, then inverted liquid nitrogen jar, placed in the indoor safety should not be overturned, the natural air dry, or as before the blower for drying. Note that in the brushing process, action to despise, pour the water temperature can not exceed 40℃ , the total weight of not more than 2kg is appropriate.

Welcome To Our Company Hope We Can Have A Good Cooperation.