Self-inspection of liquid nitrogen tank

Liquid nitrogen tanks can generally be divided into liquid nitrogen storage tanks and liquid nitrogen transport tanks. The liquid nitrogen storage tank is mainly used for the static storage of indoor liquid nitrogen, and should not be used for long-distance transportation under working conditions; the liquid nitrogen transportation tank has designed a special anti-shock design liquid nitrogen tank in order to meet the transportation conditions. In addition to being statically stored, it can also be used for transportation under the condition of filling liquid nitrogen, but it should also avoid violent collision and vibration.

Note the use of liquid nitrogen tanks:

First, the inspection before use

Before filling the liquid nitrogen tank, the liquid nitrogen tank should first check whether the shell is recessed or not, and whether the liquid nitrogen tank vacuum exhaust port is intact. If it is damaged, the degree of vacuum will decrease. In severe cases, the intake air will not be insulated, so that the upper part of the tank will be frosted, the liquid nitrogen loss will be large, and the liquid nitrogen tank will lose its value of continued use. Next, check the inside of the tank. If there is any foreign matter, the liquid nitrogen tank must be taken out to prevent the inner tank from being corroded.


 

2. When liquid nitrogen is filled in liquid nitrogen tank

Be careful when filling liquid nitrogen. For new tanks or tanks that are in a dry state, they must be slowly filled and pre-cooled to prevent the liner from being damaged too quickly and reducing the service life. Do not pour liquid nitrogen on the vacuum vent when filling liquid nitrogen to avoid a drop in vacuum. The liquid nitrogen tank plug is made of heat-insulating material, which can prevent liquid nitrogen from evaporating and can also function as a fixed lifting cylinder. Therefore, the wear and tear should be minimized during the switch, and the liquid nitrogen tank can prolong the service life.

Third, the inspection during use

Always check during use. The liquid nitrogen tank can be observed by the eye or by hand. If the surface is found to be frosted, it should be stopped. The liquid nitrogen tank, especially the inner wall of the neck tube, should not be scraped with a knife when the frost is frozen on the inner wall of the neck tube to prevent the inner wall of the neck tube from being damaged. To cause a vacuum, the liquid nitrogen tank should take out the liquid nitrogen and let it melt naturally.

  If you are interested in the Liquid Nitrogen Tanks, Liquid Niyrogen Container, Liquid Nitrogen Dewar or need to consult, please click on our online customer service.Welcome sending your inquiry.

  Sales Manager: Amanda Hou

  Email: amanda@biocryocontainer.com

  andy@biocryocontainer.com

  Phone/WhatsApp: +8618937399428

Welcome To Our Company Hope We Can Have A Good Cooperation.